-
Imagine SNP Firmware and Resources
Please find below a useful repository of all the Imagine SNP firmware files, manuals etc. Link
-
-
R&D -BMD Presentation Converter
Internal test of the Blackmagic 2110 IP Presentation Converter Last update: Inputs: Outputs: Settings: Considerations: Setup Settings Page Video Settings Page Audio Settings Page ST2110 Settings Page
-
Programming Tait TP9300 with a mixture of analogue & digital Channels
Just like with the Motorola Portables the TP9300 handhelds can be programmed with a mixture analogue and digital if the following is observed. The TP9300 can handle a maximum of […]
-
Tech Bulletin – IBC 2025
IBC 2025 was again held in Amsterdam bringing nearly 44,000 visitors to the RAI to see some 1,300 exhibitors over a four day period. A small team from CT attended, […]
-
Programming digital Motorola radios on site using CPS2.0
Programming digital Motorola radios on site using CPS2.0 This training section is meant only for CPS. If you are programming via RM, then the following does not apply. Sometimes onsite […]
-
OpsHub User Guide
As CT UK shifts from Rental Point to EasyJob, the existing “ICal” / “ops pages” will be retired. While EasyJob offers many advantages, some gaps and wrap-around services are still […]
-
Assigning Keys on a RTS Digital Beltpack (DBP)
Digital beltpacks from RTS can be configured using the software packages IP Edit, AZ Edit and Neo. There are some functions that the user can configure from the device itself, […]
-
Changing the Operating mode of an RTS DBP
RTS Digital Beltpacks (DBP) with firmware version v 2.0.0 can now be toggled between OMNEO and RVON modes, without the need to re-flash firmware. RVON is RTS Intercom’s proprietary Voice […]
-
Changing the IP Address on a TN9300 Tait Node
Before you start you will need the following: A USB Keyboard. A Monitor with a VGA input A VGA Cable Connect the monitor to the VGA port on the server […]
-
Programming Radios on RM
To access RM You need to be on the FOG Network. If RM has just been installed, you’ll need to add the server address “rm2.ct-networks.com” and port “443”. The main […]
-
Starlink Support and Location Updates Through Clarus
Clarus manage the CT Starlink subscriptions. Starlink no longer requires an update of location for the service to operate, as long as the Starlink remains in the country it’s registered […]
