Author: David Fyffe
-
CT London’s Default Barco E2 / S3 / Encore 3 Frame Configuration
Barco Encore 3 frame: Barco E2 – Gen1 frame: Barco E2 – Gen2 frame: Barco S3 frame:
-
R&D Blackmagic IP Mini to HDMI
Information below about the IP Mini to HDMI converters. We found an issue with the fans on the BMD IP Mini to HDMI converters. The Internal fan will work its way loose from its mount causing it to catch on the chassis and stop spinning. This will in turn cause the unit to overheat. There…
-
-
-
G Rear GPU Lights
This explains the meaning of the lights on the DP outputs on the G fleet.
-
-
Trigger Powerpoint From Companion – Using Irisdown Remote Show Control Add In
Simple steps to control a powerpoint presentation from companion (and a streamdeck):
-
Lenovo P16 Charging Issue
There is an occasional issue where the Lenovo P16’s will not charge using the Lenovo powerpack, it is not detected and nothing happens when its connected. To resolve please follow these ‘Pin Hole Reset’ steps.
-
How to log in to App store/Apple ID on CT Apple Show Machines
Apple ID has a heartbeat that will log you out if it does not see the Apple servers within a few days. Because of this it is likely that the show machines will know the account but it will need to be re logged in to access some features like free apps on the app…
-
Golf Scoreboard NUC Image Deployment Guide
The Golf scoreboard NUC’s have a dedicated image for the Slim 11i7 generation machines. The NUC has a couple of software packages installed to facilitate the smooth installation onsite. The prep process only requires the TeamViewer steps to be completed.
-
G1 Hardware Advisory
It is suggested to use the front USB ports to achieve sustained data transfers from external hard drives to and from the G1 machines, avoid using rear USB ports.
-
Protected: Remote Contribution Kit Remote Access Details
There is no excerpt because this is a protected post.