Category: Network
-
VLANs And Virtual NIC’s for Windows
The following show PowerShell commands to set up virtual NIC’s and VLAN tag them in Windows 10 and 11 now that the Intel Pro Set tool is no longer supported. 4. —Select Network Adaptor for Trunk port, Hit enter5. —Add and set names for virtual interfaces 6. —Set vlan ID 7. –Set Network Adaptor Static…
-
Working with Netgear AV M4250 Network Switches
NETGEAR AV Line M4250 switches can be configured using multiple interfaces, each suited to different use cases: The AV UI is designed for rapid deployment using pre-defined profiles optimised for common AV applications. It also allows users to create and save custom profiles Default Configuration Out Of Band (OOB) Management Port The OOB management port…
-
Imagine SNP Firmware and Resources
Please find below a useful repository of all the Imagine SNP firmware files, manuals etc.
-
Starlink Support and Location Updates Through Clarus
Clarus manage the CT Starlink subscriptions. Starlink no longer requires an update of location for the service to operate, as long as the Starlink remains in the country it’s registered to. CT’s Starlink is registered to the UK address if location needs to be updated to another country address, this can be done by contacting…
-
2110 Video Bandwidth Calculator
Feel free to use the below spreadsheet to calculate the estimated bandwidth for a 2110 video stream. You can change the resolution to a custom range, and select from a variety of frame rates / bit depths / sampling formats as per the industry standard & 2110-20 whitepaper.
-
Mellanox 2010 Switch – MNSET Docker & DHCP Docker Configuration Guide
This guide provides internal technical staff with step-by-step instructions to deploy Docker-based services (such as DHCP) on a Mellanox 2010 switch. It includes file transfer methods from macOS and Windows, switch configuration, Docker container management, and DHCP configuration using a dnsmasq.conf file.
-
Mellanox 2010 Switch – Firmware Update and Configuration Template Application Guide
Purpose This guide provides step-by-step instructions for updating the firmware and applying configuration templates to a Mellanox 2010 switch using both the Command-Line Interface (CLI) and the web-based user interface (Web UI). It is intended for internal use by IT staff and network administrators.
-
Prodigy DirectOut Ravenna Setup Guide
The following setup guide is to do with the Ravenna Expansion Card on the DirectOut Prodigy for use cases of converting ST-2110-30 streams to and from Dante. This is the home page where you will set up your streams and a few other options. Clicking on an Input stream will open your…
-
GPI Tally via SKAARHOJ ETH-GPI Link (TSL) to Hi Human Interface Control System
To receive tally into Hi Control system you can use Skaarhoj ETH-GPI Link device to take in GPI’s and convert it to TSL protocol. There is two ways to configure SKAARHOJ device to output TSL messages, online and local configuration. Before starting configuration please proceed to Step 1 to connect the device to the SKAARHOJ…
-
Riedel Fusion 6B Firmware
Please find attached the most recent (4.7) firmware for the Riedel Fusion units. This adds useful features including RS-FEC as well as various other quality of life improvements however running this new firmware the device is limited to 4×4 3G SDI, or 1×1 12G SDI / HDMI. When operating in 4×4 SDI mode, dual TX…
-
-