Category: Comms

  • RTS Call Indicators

    RTS Call Indicators

    We have produced a signalling beacon to provide a visual alert of incoming calls on RTS ODIN and OMS intercom systems. These are useful in areas of high ambient noise, or when the Keypanel speaker cannot be used. The device consists of a power supply and relay, housed in a 3-D printed enclosure with top-mounted…

  • DANTE Technical Dives

    DANTE Technical Dives

    DANTE Technical Dives Audinate recently ran a series of short webinars that may be of interest to those working in Audio and Comms. A recording of each Technical Dives will be available from the Audinate website soon. In the meantime, handouts from each of the webinars are included in the links below. DANTE Over Distance…

  • ODIN and OMS Intercom Functions

    ODIN and OMS Intercom Functions

    Introduction ODIN is a matrix intercom solution, with options to license up to 128 ports per unit.  The intercom can be scaled up by connecting  up to a maximum of eight ODINs. This achieves a maximum of 1024 ports. ODIN is suited to large, complex intercom configurations. OMNEO Main Station (OMS) is a digital partyline…

  • OMNEO Main Station – OMS

    OMNEO Main Station – OMS

    OMNEO Main Station (OMS) is a digital partyline Intercom solution, capable of the many applications required on events.   OMS is similar to ODIN, which is a matrix intercom system, but has some features that are different and some limitations.  What are the capabilities of OMS?  OMS comes in various formats, which are determined by the…

  • Riedel Performer AAS ( Audio Assignment Software.) 

    Riedel Performer AAS ( Audio Assignment Software.) 

    The following guide explains how to interface Riedel Performer (C44+) and Bolero (NSA) channels using the AAS software.  Assigning channels  Decide the names of each channel. In this example there are 5 channels to be shared (interfaced) between the wired and wireless systems.  We will refer to these as 4-Wires, as listed below.  4-Wire Channels…

  • Bolero Band Stop Filter System

    Bolero Band Stop Filter System

    A solution for overcoming interference with Bolero 1.9Ghz in outdoor settings. Background Bolero uses an operating frequency in the DECT (Digital Enhanced Cordless Telecommunications) band of the electromagnetic spectrum at approximately 1.9GHz. This frequency is sensitive to interference from 5G mobile cell sites, which transmit at a much higher power than Bolero. Such high-power transmissions…

  • Glensound Silver COIN-4016 Commentary panel

    Glensound Silver COIN-4016 Commentary panel

    The Glensound Silver COIN 4016 commentator panel is a dual commentator and intercom panel for use with RTS intercom systems such as ODIN and OMS. The design is based on the RTS DKP-4016 16 key desktop panel, and it can be used standalone or integrated with a comms matrix. The panel uses OMNEO technology and…

  • Bolero Talkback Adaptors

    Bolero Talkback Adaptors

    We have purchased a stock of Bolero talkback adaptors from CTADAPT. The adaptors are XLR-4F to 2 x 3.5mm socket. The adaptors are intended for presenter talkback and are supplied with a microphone and a pair of stereo earphones, which can be swapped for personal in-ear devices.

  • Tait Node Failed Alarm Feature

    Tait Node Failed Alarm Feature

    So you think your radio network is broken (Node failed alarm)

  • Using the ISO Function in AZ Edit.

    Using the ISO Function in AZ Edit.

    Using the ISO Function in AZ Edit. Most often used for cameras running from a CCU, the ISO function in AZ Edit is a useful tool that can be applied to any ports that are members of a partyline.

  • Getting started with Dante Domain Manager
  • Firmware Updating RTS Digital Beltpacks

    Firmware Updating RTS Digital Beltpacks

    Use the following instructions to update the firmware on the RTS Digital Beltpacks.