Tag: network
-
Imagine SNP Firmware and Resources
Please find below a useful repository of all the Imagine SNP firmware files, manuals etc.
-
2110 Video Bandwidth Calculator
Feel free to use the below spreadsheet to calculate the estimated bandwidth for a 2110 video stream. You can change the resolution to a custom range, and select from a variety of frame rates / bit depths / sampling formats as per the industry standard & 2110-20 whitepaper.
-
Riedel Fusion 6B Firmware
Please find attached the most recent (4.7) firmware for the Riedel Fusion units. This adds useful features including RS-FEC as well as various other quality of life improvements however running this new firmware the device is limited to 4×4 3G SDI, or 1×1 12G SDI / HDMI. When operating in 4×4 SDI mode, dual TX…
-
-
Arista mDNS Gateway
Arista switches are able to run an mDNS gateway service which is useful for systems that use mDNS for discovery and if you want that discovery to work across VLANs.
-
-
-
-
Cisco 4500 Boots to Rommon Mode
Sometimes when powering up a Cisco 4500 it will boot into Rommon mode by default rather than launching the Cisco IOS operating system as it should. You can get the switch to boot from within Rommon mode simply by entering the command ‘boot’ however ideally we need to ensure that this isn’t necessary every time…
-
SMPTE 2110 – Helpful Resources
Please find below links for some useful SMPTE 2110 resources. I’ll add to this as I find more. PTP Explained in a non offensive way
-
How to Interface Imagine SNP with Kairos
It’s possible to connect the Imagine Communication SNP directly with a Panasonic Kairos without the need for external switches or clocks.
-
Getting started with FLOW – TFC
FLOW uses IP technology to let you transport low latency video, audio, comms and data signals across a venue using the concept of ‘Nodes’ which are liked together using fibre. Our control software TFC allows you to control the routing of these signals in the same way as a traditional video router and sits ‘over…