-
Prep & Deprep Checks
First Piece of Kit (barcode LG55/) Second Piece of Kit (barcode SM58/) Third Piece of Kit (barcode G1/) Fourth Piece of Kit (barcode DP4800/)
-
Deep Space Info and Challenges
Deep space has got a permanent equipment assigned for the training in the IPTV, Millumin, Playback Pro, Pro Presenter, Pixera and TFC system
-
SPMs for Comms
Using SPM’s to monitor party lines is a really useful way of keeping rehearsals flowing and complaints of “the comms aren’t working” (when it’s actually someone not wearing there headset) […]
-
Cisco 4500 Boots to Rommon Mode
Sometimes when powering up a Cisco 4500 it will boot into Rommon mode by default rather than launching the Cisco IOS operating system as it should. You can get the […]
-
RCD/MCB Breaker Locations at E2
If you trip out a ring main and need to know where the consumer distro unit is, check this drawing. All electrical outlets in the building are labelled with their […]
-
-
-
Basic Configuration and Operation of Ultrix
A brief overview of common job related configuration steps
-
Basic Configuration and Operation of Tallyman
A brief overview of common job related configuration steps
-
How to Reset / Check-In a Tallyman/Ultrix PPU System
Quick start guide on resetting, checking in or upgrading a 4k PPU with Ultrix and Tallyman at CT
-
Printing a Patch Panel Label with the Wago Printer
These instructions will show you how to use the Wago printer to print patch panel labels. You will NOT need PatchCAD for this method.
-
G1 Hardware Advisory
It is suggested to use the front USB ports to achieve sustained data transfers from external hard drives to and from the G1 machines, avoid using rear USB ports.
