-
Riedel C22 & Artist COAX Client Card to Run C3 Beltpacks
It is possible to interface a C3 beltpack without the need to use a C44+ but instead a Riedel performer C22. The unit will connect to an odd numbered Artist, […]
-
Tait TB7100 Radio Base TX-RX Sync
The Tait TB7100 radio base works as a half-duplex line connected base when in constant Tx.
-
Using Fractional Framerates on MediorNet
MediorNet will handle partial frame rates of 59.95, 29.97 and 23.98 but the outputs must be configured for it.
-
Panasonic 3Chip DLP Lens Compatibility
Use these tables to see if the lens is compatible with the Projector you have selected.
-
Bolero Wireless Intercom User Guide
Bolero is a 6 channel wireless intercom which allows users to communicate in groups or party lines.
-
Prep & Deprep Checks
First Piece of Kit (barcode LG55/) Second Piece of Kit (barcode SM58/) Third Piece of Kit (barcode G1/) Fourth Piece of Kit (barcode DP4800/)
-
Deep Space Info and Challenges
Deep space has got a permanent equipment assigned for the training in the IPTV, Millumin, Playback Pro, Pro Presenter, Pixera and TFC system
-
SPMs for Comms
Using SPM’s to monitor party lines is a really useful way of keeping rehearsals flowing and complaints of “the comms aren’t working” (when it’s actually someone not wearing there headset) […]
-
Cisco 4500 Boots to Rommon Mode
Sometimes when powering up a Cisco 4500 it will boot into Rommon mode by default rather than launching the Cisco IOS operating system as it should. You can get the […]
-
RCD/MCB Breaker Locations at E2
If you trip out a ring main and need to know where the consumer distro unit is, check this drawing. All electrical outlets in the building are labelled with their […]
-
-
