-
Shutting Down Silent Brick Drives
When shutting down a Fast-LTA Silent Brick Drive it is important to eject the Bricks from the Drive for transport. When the Drive boots up again it calibrates the eject […]
-
Kairos Training Rack – IP Map
Management (Untagged) – Kairos Core – 10.10.10.10 Mellanox Switch Mgmt – 10.10.10.51 Hyperdeck – 10.10.10.50 Kairos Creator PC (Trainer) – 10.10.10.237 Kairos Creator PC (Student 1) – 10.10.10.238 Kairos Creator […]
-
Uninstalling Nvidia Cumulus from Mellanox SN2010 (and installing Mellanox Onyx OS)
Uninstalling Nvidia Cumulus from a Mellanox SN2010 switch and rolling back to Onyx OS By default, our Mellanox SN2010 switches will be running the Nvidia Cumulus operating system to allow […]
-
Configuring Mellanox SN2010 for SMPTE 2110
Configuring the Mellanox SN2010 for SMPTE 2110 – A basic configuration The below is a basic configuration to enable SMPTE 2110 multicast traffic on a Mellanox SN2010. ‘Switchports’ which may […]
-
Quick Start to the CT Digital Signage
CT runs a PixiLab digital signage system to drive the signage displays around the buildings. The information below is specific to this deployment and is intended for CT staff only.
-
DisplayCore Maintenance Notes
These notes are aimed at helping the service engineers at CT and not necessarily usable on site.
-
Protected: Remote Contribution Kit Remote Access Details
There is no excerpt because this is a protected post.
-
Useful Information for the Quantum StorNext Storage SAN
The Quantum Xcellis Storage Array is an 80TB storage area network (SAN) capable of operating at 16Gbps. Incorrectly startup and shutdown procedures causes the system to become unstable or corrupt […]
-
-
ETP 4G TeeBoxes
The 4G Tee Boxes deployed on the golf use various systems and services to control the systems. Below are information relating to these systems.
-
IDK IP-Ninjar Point-to Point Distribution
Software for Point-to-Point configuration can be found below, this software can’t be used when IP-Ninjar Managment & Control Platform NJT-CTB is in use.
-
Makito X Encoders/Decoders MultiSync buffering to Sync 2 SRT Channels Together
The Makito X multi-channel synchronization feature is designed to work in the broadcast industry where remote producers typically capture multiple views of the same content and transport it over a […]
