-
E2 Bridge Shutdown & Restart
To cut down on wasting energy unnecessarily the E2 Bridge should be shut down when there is a prolonged period between events. These instructions cover the process.
-
Generate UCP Config File
In order to utilise the Grass Valley UCP cards within our TFC Flow nodes at the moment some manual configuration is still required. Going forwards this process is going to […]
-
How to Interface Imagine SNP with Kairos
It’s possible to connect the Imagine Communication SNP directly with a Panasonic Kairos without the need for external switches or clocks.
-
-
Resetting a TP-Link EAP225 Outdoor Access Point
With the unit powered up, press and hold the reset button next to the network port until the LED on the side of the unit flashes green/orange. If the unit […]
-
Using the FOPM-101 to Measure Loss Through a Fibre Link
Our fibre kits contain a FibreStore Optical Power meter, simple instructions on how to use them are below.
-
RTS Odin and Omneo Webinars
Below is the recording of one of CT’s RTS training session covering Odin, IPedit and AZedit.
-
Testing 12-Core MPO Fibre with the Fluke MFTK Light Source and Power Meter
CT uses a Fluke MFTK light source and power meter set to quickly test our 12-core MPO singlemode fibres. This guide covers how to test the fibre but also how […]
-
MacOS App Opening
Apple have decided that opening apps from unidentified developers is now a setting that will not stick.
-
Getting started with FLOW – TFC
FLOW uses IP technology to let you transport low latency video, audio, comms and data signals across a venue using the concept of ‘Nodes’ which are liked together using fibre. […]
-
Using a Glensound Inferno Commentator Box with ODIN
The Inferno does not have a physical connection to the ODIN frame and should be treated as a series of 4-wire channels routed to the ODIN using DANTE Controller.
-
