Category: Vision
-

E2 Tallies
E2 TSL Tally output The Barco S3 and E2 will support TSL 3.1 UDP Tally output if you have a Gen 2 HDMI output card in the MV slot, it is not supported on any other card.
-

Bitfocus Companion with Kairos Support
Please find below the brand new (Beta) version of BitFocus companion, now with added support for the Panasonic Kairos. Note – This is a brand new development build so use with caution! Link
-

Panasonic HS-6000 Panel IP Settings Menu
If you have a HS-6000 panel that does not boot up, showing a Panasonic Logo on the control monitor, this may mean that the IP address of the panel is not in the same range of the main frame.
-

SAM (Grass Valley) Roll Call
Please find below the installers for SAM Roll Call and GV Orbit, essential for managing our new UCP IP cards and other Grass Valley kit.
-

Configuring Cisco 3560-CX PoE+ for Panasonic DC-BGH1 Mini Cams
The Cisco 3560-CX is a compact passively cooled 14 port POE+ switch, ideal for powering CT’s new Panasonic Mini Cams, however by default the PoE will not work correctly. Follow the instruction below to ensure compatibility.
-

Panasonic Kairos
Training Materials Kairos Training Presentation Kairos Training Activities Kairos Training Routine Many of the topics covered during training sessions can also be found in video format, useful for a refresher or if you need to refer back at a later date! Kairos Tutorial Videos
-

Protected: Remote Contribution Kit Remote Access Details
There is no excerpt because this is a protected post.
-

IDK IP-Ninjar Point-to Point Distribution
Software for Point-to-Point configuration can be found below, this software can’t be used when IP-Ninjar Managment & Control Platform NJT-CTB is in use.
-

Makito X Encoders/Decoders MultiSync buffering to Sync 2 SRT Channels Together
The Makito X multi-channel synchronization feature is designed to work in the broadcast industry where remote producers typically capture multiple views of the same content and transport it over a network to a central production facility. All these channels need to be synchronized to within one frame period at the decoders, so that downstream equipment…
-

Acquiring LOG from Lightware MX2 matrix
To retrieve log for support from Lightware MX2 model of the matrix you need to access a subpage at http://<matrix_ip_address>/log.
-

Dayang Fresco Credentials and Software
IP address is shown on the screen when device is switched on.Password: admin Quick setting up manual can be accessed here and software on this link. If there is issues with the device, there is a battery on the motherboard, remove it, leave the unit without the battery and replace with a fresh battery.
-

