Category: Vision
-
Customising WireShark to Analyse SMPTE-2022-6 and SMPTE-2110 RTP and PTP Traffic
WireShark can be customised by adding scripts and columns to the software to better analyse and report on SMPTE-2110 network traffic. Although this article is aimed at this traffic, many […]
-
E2 Tallies
E2 TSL Tally output The Barco S3 and E2 will support TSL 3.1 UDP Tally output if you have a Gen 2 HDMI output card in the MV slot, it […]
-
Bitfocus Companion with Kairos Support
Please find below the brand new (Beta) version of BitFocus companion, now with added support for the Panasonic Kairos. Note – This is a brand new development build so use […]
-
Panasonic HS-6000 Panel IP Settings Menu
If you have a HS-6000 panel that does not boot up, showing a Panasonic Logo on the control monitor, this may mean that the IP address of the panel is […]
-
SAM (Grass Valley) Roll Call
Please find below the installers for SAM Roll Call and GV Orbit, essential for managing our new UCP IP cards and other Grass Valley kit.
-
Configuring Cisco 3560-CX PoE+ for Panasonic DC-BGH1 Mini Cams
The Cisco 3560-CX is a compact passively cooled 14 port POE+ switch, ideal for powering CT’s new Panasonic Mini Cams, however by default the PoE will not work correctly. Follow […]
-
Panasonic Kairos
Training Materials Kairos Training Presentation Kairos Training Activities Kairos Training Routine Many of the topics covered during training sessions can also be found in video format, useful for a refresher […]
-
Protected: Remote Contribution Kit Remote Access Details
There is no excerpt because this is a protected post.
-
IDK IP-Ninjar Point-to Point Distribution
Software for Point-to-Point configuration can be found below, this software can’t be used when IP-Ninjar Managment & Control Platform NJT-CTB is in use.
-
Makito X Encoders/Decoders MultiSync buffering to Sync 2 SRT Channels Together
The Makito X multi-channel synchronization feature is designed to work in the broadcast industry where remote producers typically capture multiple views of the same content and transport it over a […]
-
Acquiring LOG from Lightware MX2 matrix
To retrieve log for support from Lightware MX2 model of the matrix you need to access a subpage at http://<matrix_ip_address>/log.
-
Dayang Fresco Credentials and Software
IP address is shown on the screen when device is switched on.Password: admin Quick setting up manual can be accessed here and software on this link. If there is issues […]