Category: Comms
-
-
RTS Odin and Omneo Webinars
Below is the recording of one of CT’s RTS training session covering Odin, IPedit and AZedit.
-
Using a Glensound Inferno Commentator Box with ODIN
The Inferno does not have a physical connection to the ODIN frame and should be treated as a series of 4-wire channels routed to the ODIN using DANTE Controller.
-
Setting up the Glensound Silver COIN 4016 Commentator Panel
The COIN Silver 4016 is a hybrid panel based on the RTS DKP4016 with added circuitry and hardware to provide a dual commentator panel.
-
DANTE Domain Manager at E2
DDM (DANTE Domain Manager) is installed on the network at E2 and is used to manage domains such as in The Bridge production facility. There are some differences in using […]
-
How Comms Audio is Routed in the E2 Bridge
The following provides an insight into the routing of audio to and from remote locations when using the in-house production facilities at Creative Technology.
-
Assigning a Bolero Multicast IP
When programming integrated Bolero with an Artist frame an AES67 card the following should be noted. In the Bolero tab for Bolero beltpacks in the Director software there is an […]
-
KP Panel GPIO for Tait TB7100
GPIO can be aded to the KP5032 panels to enable Tait repeaters to be keyed up when a key on the comms panel is used.
-
Luminex Gigacore 10 network switch for Bolero standalone
The standard package for Bolero standalone includes a Luminex Gigacore 10 network switch. A Bolero Profile has been loaded onto the switches and can be recalled by following the procedure […]
-
Using Bolero Internationally
Some countries and territories have different regulations regarding frequency and transmit power for the 1.9Ghz band that Bolero uses.
-
User Notes for Unity Intercom package
Unity Intercom server runs on a Mac Mini and allows configuration of server details, channels and groups, user details and audio feeds. The package contains an audio I/O licence to […]
-
Luminex 10-port Switch Fails to Power Bolero Antenna on PoE
Issue reported by Leigh Reeve, November 2019. Symptoms: Bolero antenna is not getting POE from the Luminex switch. No POE LED active on antenna and you are forced to use the PSU […]