Author: Dallas McIntosh
-
Firmware Updating Cisco CB Series Network Switches
To upgrade the firmware on a Cisco CB series network switch, follow the procedure below:
-
Firmware Updating RTS Digital Beltpacks
Use the following instructions to update the firmware on the RTS Digital Beltpacks.
-
Using 2 RTS panels with 1 Headset
Following a request that came from site, this is a good example of the functionality of the RTS OMNEO panels. An intercom user was using two KP-5032 panels and wanted […]
-
RTS Keypanel Default Configurations
RTS Keypanels can be configured from AZ edit or from the keypanel menu.
-
Unity Products
Unity Intercom is an app-based intercom which can be interfaced with existing partyline comms. The intercom is comprised of a Unity Server which runs on a Mac computer and Unity Clients, […]
-
Riedel C22 & Artist COAX Client Card to Run C3 Beltpacks
It is possible to interface a C3 beltpack without the need to use a C44+ but instead a Riedel performer C22. The unit will connect to an odd numbered Artist, […]
-
Tait TB7100 Radio Base TX-RX Sync
The Tait TB7100 radio base works as a half-duplex line connected base when in constant Tx.
-
Bolero Wireless Intercom User Guide
Bolero is a 6 channel wireless intercom which allows users to communicate in groups or party lines.
-
-
Synchronous Clocking in a DANTE Domain
Precision Time Protocol (PTP) is a protocol used to synchronise clocks throughout a computer network. On a Local Area Network, it achieves clock accuracy in the sub-microsecond range.
-
-