Tag: mellanox
-
Mellanox 2010 Switch – MNSET Docker & DHCP Docker Configuration Guide
This guide provides internal technical staff with step-by-step instructions to deploy Docker-based services (such as DHCP) on a Mellanox 2010 switch. It includes file transfer methods from macOS and Windows, switch configuration, Docker container management, and DHCP configuration using a dnsmasq.conf file.
-
Mellanox 2010 Switch – Firmware Update and Configuration Template Application Guide
Purpose This guide provides step-by-step instructions for updating the firmware and applying configuration templates to a Mellanox 2010 switch using both the Command-Line Interface (CLI) and the web-based user interface (Web UI). It is intended for internal use by IT staff and network administrators.
-
SMPTE 2110 – Helpful Resources
Please find below links for some useful SMPTE 2110 resources. I’ll add to this as I find more. PTP Explained in a non offensive way
-
Getting started with FLOW – TFC
FLOW uses IP technology to let you transport low latency video, audio, comms and data signals across a venue using the concept of ‘Nodes’ which are liked together using fibre. Our control software TFC allows you to control the routing of these signals in the same way as a traditional video router and sits ‘over…
-
-
Installing Rivermax Display
Rivermax Display, part of the Nvidia Rivermax SDK allows you to output 2110 streams from a standard desktop computer using a high bandwidth network card. The Rivermax Display driver emulates an extended desktop within Windows and allows you to use any standard application to be output as uncompressed IP video.
-
Uninstalling Nvidia Cumulus from Mellanox SN2010 (and installing Mellanox Onyx OS)
Uninstalling Nvidia Cumulus from a Mellanox SN2010 switch and rolling back to Onyx OS By default, our Mellanox SN2010 switches will be running the Nvidia Cumulus operating system to allow for better future proofing, however, there may be a necessity to roll the switches operating system back to Mellanox Onyx which has a much more…
-
Configuring Mellanox SN2010 for SMPTE 2110
Configuring the Mellanox SN2010 for SMPTE 2110 – A basic configuration The below is a basic configuration to enable SMPTE 2110 multicast traffic on a Mellanox SN2010. ‘Switchports’ which may have devices connected that will send or receive SMPTE 2110 traffic, including Embrionix modules, Panasonic Kairos etc will be placed into a single VLAN (VLAN…