-
Sony FW-55BZ35F and FW-65BZ35F Normal/Pro operation mode
Sony 55″ and 65″ TV’s have 3 different modes: Normal/Pro settings and Pro. Normal mode: This is the default mode. [Pro mode] functions are not available in this mode. Pro settings mode: This mode allows you to set various settings of [Pro mode] functions. Pro mode: This is the operation mode for professional use where you can use the…
-
Q-Ball 3 Joystick and RCP Setup Password
Q-ball cameras have password protected ‘Engineering System Set- up’. A Password protected menu is required to access and change any of the functions which might be considered ‘fatal’ to the operation of the system if changed by somebody who does not fully understand the implications of changes to these settings! Things such as channel ID allocation and…
-
Bolero Beltpacks Won’t Always Detect the Type of Headset Connected
Bolero beltpacks should normally detect the type of headset and therefor mic connected however this sometimes isn’t the case. If the mic is quiet or isn’t functioning how you would expect you can set the type in the menu.
-
R&D: Chromecast/Apple TV 4K into Barco S3/E2 system
Test performed: 10 October 2019 Chromecast Connecting Chromecast into the E2/S3 on HDMI 1.4 connector shows up in EMT as a valid signal but you can see black picture only. If you toggle HDCP then you get few frames of the actual Chromecast output followed by grey picture.
-
Lightware MX4x4DVI / MX8x8DVI Factory Default Reset Procedure
UPDATE 10.10.2019 – MX 4×4 DVI doesn’t reset by following below procedure. The MX4x4 DVI will not factory reset via the button config, there is no way to ‘Factory reset’ the 4×4 but the IP can be reset via some tools we have acquired from Lightware. Contact David Fyffe.UPDATE 10.12.2019 – Lightware 4×4 MTX’s will…
-
Barco CXP Links Test
If the links between the E2/S3/Ex frames are not behaving or there are resource errors then a good place to start is checking the link cables between your frames. On the following link there is a guide how to perform the CXP link test.
-
Protected: R&D: Latency: Blackmagic BiDirectional HDMI/SDI Micro converters
There is no excerpt because this is a protected post.
-
Riello UPS VSD 3000 Alarm / Fault Codes
Riello UPS report faults and alarms using a code on their display. The codes can be found here.
-
Welcome to the Creative Technology Knowledge Base
Use the search engine to the right (or below if on mobile) to search for keywords in posts. If you find information that is wrong, or needs more detail added, please add it as a comment at the bottom of the post and we will add it in. If you want to create a post…
-
Managed SIM Card Settings and APN
The EE managed SIM cards in the rental stock require a static APN to be set for them to work. The APN is how the SIM cards handshakes with the cell towers. For normal SIM cards the APN will be set to ‘dynamic’ allowing the cell tower to handle the SIM however it wants to.…
-
Pi Multicast Test Box
Some notes on default settings for these boxes User: ubuntu Password: Creat1ve Default IP: 192.168.21.10/16 – this is set statically on the box. Default Multicast Address: udp://239.192.254.254:5000 SSH is turned on so you can remote administer it and all the content files and streaming script are located in ~/ubuntu which also happens to be the…
-
Useful Commands for the ControlPi Touch Boxes
The CT Control Pi Touchboxes can be accessed through SSH as well as through their webpage. This can often be useful for file management and OS control as it can be quicker the going through the website.