-
How to Change the EDID on a Lightware Matrix
How to change the EDID on a Lightware Matrix via the Lightware software, which EDID to choose and why.
-
How to Capture an Image with Fog
CT uses an open-source network cloning and image management system to flatten Windows machines back to a known working image. The Fog server is hosted at CT and is available […]
-
How To Use the Cadex C7400 Battery Conditioner
The Cadex C7400 is a modular battery analyser and conditioner which can have modules for multiple types of batteries fitted to it. It will run the battery through a full […]
-
How to Re Image a Machine with Paragon
CT uses Paragon Backup & Recovery to reimage its S10 and S11 machines in the field. The Images for every machine are stored locally on the Raid in a partition […]
-
How To Check Internet Connectivity on the Pepwave MAX-HD4
The Pepwave MAX-HD4 is a multi-WAN router designed to proved internet connection on remote or mobile sites. It can be populated with up to four SIM cards, two cabled WAN […]
-
How To Use the CT Encrypted USB Drives
CT are using the U-Disk EP-KP001 encrypted USB drive to store and transport sensitive client data. The drives are AES-256 hardware encrypted and ruggedised to withstand damage on site.
-
How to Re Image a Machine with Macrium
CT uses Macrium Reflect to reimage its Laptop’s and Hi Spec machines in the field. The Images for every machine are stored locally on a partition called ‘Image Store’. Imaging […]
-
SFP Cheat Sheet
Not all SFPs are the same as one another, and some equipment requires specific SFPs to work.
-
Nimbra 680 Default IP and password
The Nimbra 680 is the standard IP transport system used by NEP Connect to send video and IP over the AnyLive network
-
Protected: Lynx Technik – Yellobrik – Site Feedback
There is no excerpt because this is a protected post.
-
Resetting Redundant Riedel Artist CPU Cards
When Artist CPU cards are used as a redundant pair, the card in slot A applies settings to the card in slot B which makes it difficult to reset as […]
-
Luminex 10-port Switch Fails to Power Bolero Antenna on PoE
Issue reported by Leigh Reeve, November 2019. Symptoms: Bolero antenna is not getting POE from the Luminex switch. No POE LED active on antenna and you are forced to use the PSU […]
