Bolero antennae have a Power PCBA version of either V1.0.0 or V3.0.0 depending on the date of manufacture. This is a hardware attribute and cannot be changed.
In a recent firmware update a safety feature was introduced, which will power an antenna off if there is a mismatch in Power PCBA versions.
Bolero antennae can only be configured in Standalone Link mode where the Power PCBA version is 3.0.0. The Power PCBA version can be viewed from the menu buttons of the antennae by navigating to INFORMATION>SYSTEM INFO and scrolling to Power PCBA, there should also be a label on the rear of the antenna.
This only affects Standalone Link mode, systems running in Standalone AES67 mode are not affected.
Leave a Reply