Category: Vision
-
PlayBack Pro Only Supports ProRes
PlayBack Pro is only designed to work with ProRes files. Although it has been proven to work with H.264 .mov and .mp4 files, it is not supported by DT Videolabs […]
-
Epson EB-L1755U – 3G SDI Level A only
Epson EB-L1755U projector doesn’t handle 3G SDI Level B signal at all, use Level A signal instead and be aware to specify converters that support Level A signal as some […]
-
PowerPoint Embedded VT’s
When using multiple outputs from a laptop/PC (e.g. full screen slide and notes) in the PowerPoint Presenter mode, you can encounter issues in PPT presentations that have been made elsewhere […]
-
Sony FW-55BZ35F and FW-65BZ35F Normal/Pro operation mode
Sony 55″ and 65″ TV’s have 3 different modes: Normal/Pro settings and Pro. Normal mode: This is the default mode. [Pro mode] functions are not available in this mode. Pro settings […]
-
R&D: Chromecast/Apple TV 4K into Barco S3/E2 system
Test performed: 10 October 2019 Chromecast Connecting Chromecast into the E2/S3 on HDMI 1.4 connector shows up in EMT as a valid signal but you can see black picture only. […]
-
Lightware MX4x4DVI / MX8x8DVI Factory Default Reset Procedure
UPDATE 10.10.2019 – MX 4×4 DVI doesn’t reset by following below procedure. The MX4x4 DVI will not factory reset via the button config, there is no way to ‘Factory reset’ […]
-
Barco CXP Links Test
If the links between the E2/S3/Ex frames are not behaving or there are resource errors then a good place to start is checking the link cables between your frames. On […]
-
Barco Event master EX expansion unit – IP address configuration
To obtain IP address and Unit ID of the EX frame you need an USB thumb drive formatted as FAT32 file system and a computer running Event Master Toolset app. […]