Author: Joe Hicks
-
Luminex 10-port Switch Fails to Power Bolero Antenna on PoE
Issue reported by Leigh Reeve, November 2019. Symptoms: Bolero antenna is not getting POE from the Luminex switch. No POE LED active on antenna and you are forced to use the PSU […]
-
MediorNet Firmware and MediorWorks
Since the release of firmware 6.00.00 you have required an approved Riedel login to download firmware and software for Riedel products. The process of signing up and the account being […]
-
Setting the WAN IP of the UniFi Security Gateway
The UniFi system is a cloud managed service where all settings are controlled by the UniFi Controller. To access these settings all the Ubiquiti devices need access to the internet, […]
-
Makito X Factory Reset
The Makito X encoder and decoders can be factory reset if they’re inaccessible. To the left of the network port there is a hole for a reset button. Hold the […]
-
CT Default Usernames, Passwords and Codes
CT use a standard set of credentials for their rental equipment to make use of the kit on site as easy as possible.
-
Bolero Beltpacks Won’t Always Detect the Type of Headset Connected
Bolero beltpacks should normally detect the type of headset and therefor mic connected however this sometimes isn’t the case. If the mic is quiet or isn’t functioning how you would […]
-
Managed SIM Card Settings and APN
The EE managed SIM cards in the rental stock require a static APN to be set for them to work. The APN is how the SIM cards handshakes with the […]
-
Useful Commands for the ControlPi Touch Boxes
The CT Control Pi Touchboxes can be accessed through SSH as well as through their webpage. This can often be useful for file management and OS control as it can […]
-
Artist CPU Redundant Link Cable
To use two CPU cards in an Artist frame as a redundant pair you have to connect the HDLC ports together. It will not work over fibre or over the […]
-
Tait TB7300 Default Login
The Tait TB7300 when factory reset have the following settings: Web IP Address: 192.168.1.2Subnet: 255.255.255.0Username & password: admin / tbc_admin Serial Console Speed: 57600Username & password: root / k1w1 IP […]
-
How to Prepare Control Laptops to Have a New Image Captured
This guide should be followed before taking a new image on the IN control laptops.
-
Accessing IP Streams from Antrica PTZ Cameras
The video stream from Antrica PTZ cameras can be accessed by VLC by opening: rtsp://username:password@ip-address:554/video1 The cameras have four encoders in them which can each produce a different quality stream. […]