Author: Joe Hicks
-
Copying Configurations To and From Cisco Equipment
Configurations for Cisco kit can be backed up or uploaded to devices over TFTP.
-
CT Accounts with SMS Two-Factor Authentication
More and more services are removing the option to disable 2 factor authentication (2FA) from their services. To get around this we have built an SMS relayer that receives the […]
-
Configuring Stock Equipment to Work with the CT Monitoring System
CT have added a simpler web interface to an existing open source monitoring system to allow for quick deployment on site. This does mean that equipment that needs to be […]
-
Adding Files to the CT Content Portal Directly from a USB Drive
Although you can upload files to content.ct-networks.com over the web, if the records are in the office it my be quicker to add them directly to the file system of […]
-
TouchPi Startup Script
The CT Control Pi boxes launch their browser at startup and normally serve an internal webpage but this can be edited to display any webpage.
-
Receiving and Decoding an SRT Stream using BrightSign
BrightSign hardware is able to play out SRT streams but it requires a custom firmware.
-
-
Setting Up Failover WAN ports of a Cisco Router
If your venue provides a main and backup internet connection with different subnets on each line, it is going to be useful to have the Cisco 4431 or 2921 routers […]
-
Bandwidth Requirements and Recommendations for Streaming and Video Conference Platforms
Different platforms and systems have different recommendations for bandwidth required. Some of the common ones we use are detailed below.
-
Quickstart Guide to TecViz
TecViz is a live stream and slide presentation system used by CT to stream events. Follow the video below to start using the system.
-
Using iPerf3 to Test Network Throughput and Speed
Online services like speedtest.net and fast.com are useful for testing you connection speed to the internet but it cannot be used to test connection speeds across a local network. iPerf3 […]
-
AJA Kumo Configurator User Guide
To help quickly set up the Kumo following a reset, CT have written a software tool to generate the configuration.