KP Panel GPIO for Tait TB7100

GPIO can be aded to the KP5032 panels to enable Tait repeaters to be keyed up when a key on the comms panel is used.

To configure a GPIO Input to control an individual talk key, do the following:

1. Starting at the Service|Local GPIO menu, select GPIO Inputs.
2. Press the SEL button.
Opto 1 and Opto 2 appear in the panel display.
3. Using the arrow buttons, select Opto 1 or Opto 2.
4. Press the SEL button.
Function and Mode appear in the panel display.
5. Using the arrow buttons, select Function.
6. Press the SEL button.
Key Group, Not Assigned, and Talk Key appear in the panel display.
7. Using the arrow buttons, select Talk Key.
8. Press the SEL button.
Tap Key appears in the panel display.
9. Tap the talk key to be controlled by the GPIO Input.
The selected keypanel key red talk indicator LED appears.