-
Installing VMWare vSphere ESXi 6.7
The steps to install VMware vSphere ESXi 6.7 are pretty straightforward and if you’ve ever installed any kind of OS from scratch you shouldn’t have any problems with ESXi. First […]
-
-
CT Control Pi v1 Dismantle and Maintenance
The version 3 enclosures and hardware have been redesigned to make working on them easier.
-
Setting Up Point to Point Streams on the Makito X Dual Encoders and Decoders
If the IP address of the units is unknown, follow the reset procedure here to default the IP and login credentials.
-
Airsys.Cloud Required Outbound Ports
Airsys.Cloud requires a number of outbound ports to be accessible for the system to work. Some venues and IT managers may block outbound ports, especially on corporate or public networks.
-
Default Settings of IDK IP Ninjars and Preferred Configurations
Factory resetting the IP Ninjar units will return their IP address settings of to the defaults below.
-
Updating Firmware on the Bolero 4-wire Interface (NSA002)
Upgrading the Bolero 4-wire interface to version 2.1.1 cannot be done through the firmware upgrade tool on the web interface. Currently this is only though to be applicable when upgrading […]
-
How to Change the EDID on a Lightware Matrix
How to change the EDID on a Lightware Matrix via the Lightware software, which EDID to choose and why.
-
How to Capture an Image with Fog
CT uses an open-source network cloning and image management system to flatten Windows machines back to a known working image. The Fog server is hosted at CT and is available […]
-
How To Use the Cadex C7400 Battery Conditioner
The Cadex C7400 is a modular battery analyser and conditioner which can have modules for multiple types of batteries fitted to it. It will run the battery through a full […]
-
How to Re Image a Machine with Paragon
CT uses Paragon Backup & Recovery to reimage its S10 and S11 machines in the field. The Images for every machine are stored locally on the Raid in a partition […]
-
How To Check Internet Connectivity on the Pepwave MAX-HD4
The Pepwave MAX-HD4 is a multi-WAN router designed to proved internet connection on remote or mobile sites. It can be populated with up to four SIM cards, two cabled WAN […]
