Category: Rental Equipment
-
Setting Up Point to Point Streams on the Makito X Dual Encoders and Decoders
If the IP address of the units is unknown, follow the reset procedure here to default the IP and login credentials.
-
Default Settings of IDK IP Ninjars and Preferred Configurations
Factory resetting the IP Ninjar units will return their IP address settings of to the defaults below.
-
Updating Firmware on the Bolero 4-wire Interface (NSA002)
Upgrading the Bolero 4-wire interface to version 2.1.1 cannot be done through the firmware upgrade tool on the web interface. Currently this is only though to be applicable when upgrading […]
-
How to Change the EDID on a Lightware Matrix
How to change the EDID on a Lightware Matrix via the Lightware software, which EDID to choose and why.
-
How To Check Internet Connectivity on the Pepwave MAX-HD4
The Pepwave MAX-HD4 is a multi-WAN router designed to proved internet connection on remote or mobile sites. It can be populated with up to four SIM cards, two cabled WAN […]
-
How To Use the CT Encrypted USB Drives
CT are using the U-Disk EP-KP001 encrypted USB drive to store and transport sensitive client data. The drives are AES-256 hardware encrypted and ruggedised to withstand damage on site.
-
How to Re Image a Machine with Macrium
CT uses Macrium Reflect to reimage its Laptop’s and Hi Spec machines in the field. The Images for every machine are stored locally on a partition called ‘Image Store’. Imaging […]
-
SFP Cheat Sheet
Not all SFPs are the same as one another, and some equipment requires specific SFPs to work.
-
Resetting Redundant Riedel Artist CPU Cards
When Artist CPU cards are used as a redundant pair, the card in slot A applies settings to the card in slot B which makes it difficult to reset as […]
-
MediorNet Firmware and MediorWorks
Since the release of firmware 6.00.00 you have required an approved Riedel login to download firmware and software for Riedel products. The process of signing up and the account being […]
-
CT London’s Default Barco E2/S3 Frame Configuration
Barco E2 – Gen1 frame: Barco E2 – Gen2 frame: Barco S3 frame:
-
Setting the WAN IP of the UniFi Security Gateway
The UniFi system is a cloud managed service where all settings are controlled by the UniFi Controller. To access these settings all the Ubiquiti devices need access to the internet, […]