Bridge Tally Arbiter Details

—

Instructions on how to set up Tally Arbiter @ CT

Hardware

The Raspberry Pi is located in the middle rack of the Bridge rack room attached to left hand side mid rail.

IP 192.168.10.69
ssh enabled

Raspian login
user: pi
pwd: raspberry

The Tally Arbiter service will autostart when pi boots. You can check on its status/restart with the following commands….

pm2 status
pm2 monit
pm2 restart TallyArbiter
pm2 stop TallyArbiter
pm2 start TallyArbiter

The web page login details are held in the config.json file. To change, edit the file with nano.

sudo nano config.json

Tally Arbiter web page

http://192.168.10.69:4455

Producer page login

user producer
pwd prod01!

Settings page login

user admin
pwd createch

External access

http://srt.ct-networks.com:4455/
Endpoint (listeners)

**easy to add more, just replace the deviceid with new ones from the settings page.

***change chat to true if you want the messaging feature from the producers view.

Comments