Author: Joe Hicks
-
Artist CPU Redundant Link Cable
To use two CPU cards in an Artist frame as a redundant pair you have to connect the HDLC ports together. It will not work over fibre or over the […]
-
Tait TB7300 Default Login
The Tait TB7300 when factory reset have the following settings: Web IP Address: 192.168.1.2Subnet: 255.255.255.0Username & password: admin / tbc_admin Serial Console Speed: 57600Username & password: root / k1w1 IP […]
-
How to Prepare Control Laptops to Have a New Image Captured
This guide should be followed before taking a new image on the IN control laptops.
-
Accessing IP Streams from Antrica PTZ Cameras
The video stream from Antrica PTZ cameras can be accessed by VLC by opening: rtsp://username:password@ip-address:554/video1 The cameras have four encoders in them which can each produce a different quality stream. […]
-
Installing NextCloud on Ubuntu 18.0.4
This article will guide you through the installation and configuration of NextCloud so it can be used as file storage portal for clients. The customisation of the website and apps […]
-
Setting up a Bolero Antenna from New or Factory Reset
This guide will step through the standard settings that we use on Bolero standalone antenna. There are a lot of settings that we do not touch which may be needed […]
-
Password Recovery and Factory Default a Cisco 1921 Router
Helpfully the Cisco BIOS on these units has a bug and they do not respect the break key or reset button whilst it is booting, meaning you cannot easily use the password recovery feature.
-
Adding New or Factory Reset UniFi Kit to unifi.ct-networks.com
Just a little note on how to add new or reset Unifi APs to our controller.
-
Eastville Park Bristol Site Survey
Site survey of Eastvillle Park, Bristol taken on 20th April 2019 for Love Saves The day festival.
-
FastLTA Silent Brick Factory Reset
The Silent Brick Drives have the option to restore them to factory default. The process takes around 15 minutes as it restores the OS from a recovery partition.
-
Tait Node TN9300 Telnet / SSH Access
The Tait nodes run a version of RedHat Linux so it’s possible to get into their file system to save reports etc.
-