Author: Joe Hicks
-
-
CT Control Pi v1 Dismantle and Maintenance
The version 3 enclosures and hardware have been redesigned to make working on them easier.
-
Setting Up Point to Point Streams on the Makito X Dual Encoders and Decoders
If the IP address of the units is unknown, follow the reset procedure here to default the IP and login credentials.
-
Airsys.Cloud Required Outbound Ports
Airsys.Cloud requires a number of outbound ports to be accessible for the system to work. Some venues and IT managers may block outbound ports, especially on corporate or public networks.
-
Default Settings of IDK IP Ninjars and Preferred Configurations
Factory resetting the IP Ninjar units will return their IP address settings of to the defaults below.
-
How to Capture an Image with Fog
CT uses an open-source network cloning and image management system to flatten Windows machines back to a known working image. The Fog server is hosted at CT and is available […]
-
How To Use the Cadex C7400 Battery Conditioner
The Cadex C7400 is a modular battery analyser and conditioner which can have modules for multiple types of batteries fitted to it. It will run the battery through a full […]
-
How To Check Internet Connectivity on the Pepwave MAX-HD4
The Pepwave MAX-HD4 is a multi-WAN router designed to proved internet connection on remote or mobile sites. It can be populated with up to four SIM cards, two cabled WAN […]
-
How To Use the CT Encrypted USB Drives
CT are using the U-Disk EP-KP001 encrypted USB drive to store and transport sensitive client data. The drives are AES-256 hardware encrypted and ruggedised to withstand damage on site.
-
SFP Cheat Sheet
Not all SFPs are the same as one another, and some equipment requires specific SFPs to work.
-
Nimbra 680 Default IP and password
The Nimbra 680 is the standard IP transport system used by NEP Connect to send video and IP over the AnyLive network
-
Resetting Redundant Riedel Artist CPU Cards
When Artist CPU cards are used as a redundant pair, the card in slot A applies settings to the card in slot B which makes it difficult to reset as […]