Bolero antennae can be deployed over a fibre network by converting the media using the Ubiquiti U Fiber and POE passthrough.
Fig. 1 Ubiquiti U Fiber
Fig. 2 BiDi SFP Pair
Fig 3 Ubiquiti POE passthrough
The U Fiber Unit is positioned at the switch end and must be powered by a 48 V POE injector.
The POE passthrough unit is placed at the antenna end and may either be powered using a power injector or may be hard wired. The units are linked using a single core of LC fibre and the bidirectional SFPs.
The following schematic describes the setup arrangement
Leave a Reply